All DataSheet
Home » Linear » LT3471EDD DataSheet
LT3471EDD DataSheet

LT3471EDD DataSheet

Part No.
LT3471EDD
Part Marking
LBHM
Temperature
–40°C to 85°C
Package
10-Lead (3mm × 3mm) Plastic DFN
File Size
317 KB
Page
16 Pages
Manufacturer
Linear Technology
Views
1
Upload Time
2022-05-26 15:15:26
Update Time
2022-05-26
Description
IC REG MULT CONFG ADJ DL 10DFN
If you would like to buy it now or in the future, please email or add our skype hello@ic-component.com

LT3471EDD Features

■ 1.2MHz Switching Frequency
■ Low VCESAT Switches: 330mV at 1.3A
■ High Output Voltage: Up to 40V
■ Wide Input Range: 2.4V to 16V
■ Inverting Capability
■ 5V at 630mA from 3.3V Input
■ 12V at 320mA from 5V Input
■ –12V at 200mA from 5V Input
■ Uses Tiny Surface Mount Components
■ Low Shutdown Current: <1μA
■ Low Profile (0.75mm) 10-Lead 3mm × 3mm DFN Package

LT3471EDD Applications

■ Organic LED Power Supply
■ Digital Cameras
■ White LED Power Supply
■ Cellular Phones
■ Medical Diagnostic Equipment
■ Local ±5V or ±12V Supply
■ TFT-LCD Bias Supply
■ xDSL Power Supply

LT3471EDD Description

The LT3471EDD dual switching regulator combines two 42V, 1.3A switches with error amplifi ers that can sense to ground providing boost and inverting capability. The low VCESAT bipolar switches enable the device to deliver high current outputs in a small footprint. The LT3471 switches at 1.2MHz, allowing the use of tiny, low cost and low profi le inductors and capacitors. High inrush current at start-up is eliminated using the programmable soft-start function, where an external RC sets the current ramp rate. A constant frequency current mode PWM architecture results in low, predictable output noise that is easy to filter.

The LT3471EDD switches are rated at 42V, making the device ideal for boost converters up to ±40V as well as SEPIC and fl yback designs. Each channel can generate 5V at up to 630mA from a 3.3V supply, or 5V at 510mA from four alkaline cells in a SEPIC design. The device can be confi gured as two boosts, a boost and inverter or two inverters.

The LLT3471EDD is available in a low profi le (0.75mm) 10-lead 3mm × 3mm DFN package.

Related LT3471EDD Datasheet

Part No.
Datasheet
CopyRight © 2022 All DataSheet(www.all-datasheet.com)TXTLTADI